KittyAngel Next, I created the head. So what I did is I took a simple balloon from a small bag of party balloons that were 97⍧ at WalMart and inflated it to the size that I needed. Once created, I then took the wire that was used for the body and created a 3 dimensional sphere by hot glueing it to the balloon. With 8 pieces of wire, the balloon itself popped, which gave me the sphere that I needed. So with that, I took 2 more pieces of wire and hot glued to the sides for the head to maneuver like I needed to do. So in order to control the head properly, I used a 1 ft long 1/4” dowel board for the control. It took 2 hours for the basic structure construction on the head alone.
When I created the basic structure, I then added the jaw to the head. I used wire and mesh so the jaw itself could remain stable on the head. It took 15 minutes to attach the jaw to the head. So, in total, the head overall took 2 hours and 15 minutes to create out of wire.